Difference between revisions of "Tutorials:TS3 Meshing FAQ"

Revision as of 23:42, 9 January 2011 (view source) Porkypine (Talk | contribs) (→‎My texture is Blurry) ← Older edit		Revision as of 20:25, 3 May 2011 (view source) Buzzler (Talk | contribs) m (stated MLOD 00000001 as high detail mesh; fixed) Newer edit →
Line 18:		Line 18:
	[[Image:EllaMeshTutorial_14.jpg]] There are four meshes that you have to edit: high detail mesh, low detail mesh, and a sunshadow for each.		[[Image:EllaMeshTutorial_14.jpg]] There are four meshes that you have to edit: high detail mesh, low detail mesh, and a sunshadow for each.
−	:* '''MLOD 00000001''' High detail mesh	+	:* '''MLOD 00000000''' High detail mesh
	:* '''MLOD 10000001''' High detail sunshadow		:* '''MLOD 10000001''' High detail sunshadow
	:* '''MODL 00000001''' Low detail mesh		:* '''MODL 00000001''' Low detail mesh
Line 45:		Line 45:
	'''objTool'''		'''objTool'''
	*Click the MODL/MLOD Info button		*Click the MODL/MLOD Info button
−	*Browse to your MLOD 00000001	+	*Browse to your MLOD 00000000
	*You want the total Polys at the bottom		*You want the total Polys at the bottom
	<br clear="all">		<br clear="all">
Line 126:		Line 126:
−	* MLOD 00000001 High detail mesh	+	* MLOD 00000000 High detail mesh
	* MLOD 10000001 High detail sunshadow		* MLOD 10000001 High detail sunshadow
	* MODL 00000001 Low detail mesh		* MODL 00000001 Low detail mesh

---

Revision as of 20:25, 3 May 2011

Tutorials by Category
CAS | Patterns | Objects | Building | Worlds | Modding | Modding Reference

Contents 1 General 1.1 Information Overload! Where do I start? 1.2 Which Tools do I need? 2 Meshes 2.1 My mesh is invisible 2.2 My object disappears when a sim used it 2.3 How do I get my poly count 3 Textures 3.1 My mesh is shiny 3.2 One part of the texture fades 3.3 My texture is Distorted 3.4 My texture is Blurry 4 Shadows 4.1 My shadow doesn't match my object 4.1.1 Wall objects 4.1.2 Floor Objects 4.2 Outdoor shadow is from another object 5 If all else fails

General

Information Overload! Where do I start?

It is always best to start small with a project, just to get an idea of the process of creating. Most tutorials start with a simple table. Why? Because it consists of boxes. Easiest to make and easiest to map. Start with the most comprehensive tutorial, it covers everything from getting your tools setup, to meshing, uvmapping, and texturing ins/outs.

• Basic Step-by-Step guide to creating for TS3 by ellacharm3d - Wiki version
• Basic Step-by-Step guide to creating for TS3 by ellacharm3d - Download version

Which Tools do I need?

• TS3 Modding Tools

Meshes

There are four meshes that you have to edit: high detail mesh, low detail mesh, and a sunshadow for each.

• MLOD 00000000 High detail mesh
• MLOD 10000001 High detail sunshadow
• MODL 00000001 Low detail mesh
• MLOD 10000001 Low detail sunshadow

My mesh is invisible

If your mesh appears to have taken odd shadings, or all you can see is the ground shadow, then you have mixed up the group order of your objects in Milkshape. In ts3 the order of the groups is very important for the game to know which texture properties to apply to it. You will need to make note of the order of the groups and which mesh is in what group when you first import your mesh.

Quick fix: In Milkshape use the Up/Down buttons in the group tab to move the groups to the proper order.

If your groups are in the correct order then check to make sure your Multiplier does not have a black alpha.

My object disappears when a sim used it

Each object in TS3 has at least one joint that it is assigned to, but some have more than one. Objects that animate when a sim interacts with them will have the object disappear if the joint is not assigned or reassigned properly.

To fix this you will need to know what joint the original mesh was assigned to. If you did not make note of it then you may need to reimport the original mesh into Milkshape to find it.

Quick fix: Select the mesh part to assign to a joint, Select the joints tab, scroll to find the joint, then click assign.

How do I get my poly count

objTool

• Click the MODL/MLOD Info button
• Browse to your MLOD 00000000
• You want the total Polys at the bottom

TSRW

• Click the Mesh tab
• Set drop down box to High level of detail
• This section may vary, but in this case Group 0 is the mesh and Group 1 is the shadow (you only want the total of all mesh groups and not the shadow)

Textures

For more information on the dds files in your package please see the IMG File Type for a more detailed explanation of what job they perform.

My mesh is shiny

Does your mesh take on a very milky shiny look in game? This is because the alpha layer of your specular is white instead of black. Change it to all black and it will lose the milky shine.

• Specular - black alpha
• Multiplier - white alpha
• Mask

One part of the texture fades

Wondering why the image is faded on one part of your mesh and not another when they share the same channel? One channel is faded? Well take a look at your mask, you have RGB values that are not pure. Make sure each one is 255 for each respective color, if they are slightly off or even largely off, your texture will have a faded look to it. R(255,0,0) G(0,255,0) B(0,0,255)

This could be useful too! So don't forget it.

My texture is Distorted

The tiling needs to be adjusted. In TS3 you can't simply take your original 256x256 image and change it to 512x512 without adjusting some other values too, otherwise the game will not render the new image properly. If you want to change the image size of your object you will need to also change the tiling. This may be in addition to the Blurry texture issue.

Quick fix:

• Open the package in s3pe.
• Select the OBJD tag
• Click the GRID link at the bottom of the window to open the Data Grid options.
• Click on the word Materials to select it.
• You will see a little box with 3 dots appear at the far right. Click on that box to open the options.
• Note: To open and close thesub folders, click on the + sign next to each entry.
• For Material ), 1, 2, etc. Open MaterialBlock/TypeCodes.
• Here is listed the preset pattern for A, B, C, and D(if applicable). Change the values to correspond to the tiling you want using the handy String Table to find the right ones. ie: ControlCode 0x3c is Pattern A, Unknown 1 is X tiling and Unknown 2 is Y tiling.

My texture is Blurry

You have created a larger image than the original clone had so you need to edit some values in your mesh before recompiling. You will need to edit the .mtlsrc of the blocks that are responsible for your texture (block 13 and 14 as shown in the example). To find them use ObjTool and select Model Info. The blocks for your material will be the group with the most vertices, (MLOD-00000), and underneath it will show you which blocks. Edit those blocks in a text editor, finding the two lines that list MaskWidth and MaskHeight. Change these to whatever your new image size is.

Mask Width/Height Values:

• 00000080 is 128
• 00000100 is 256
• 00000200 is 512
• 00000400 is 1024

Shadows

My shadow doesn't match my object

Wall objects

If the shadow on your new object doesn't quite match with your mesh, you will need to remap the shadow mesh. All meshes are mapped to a standard image blob. This is one texture with multiple shapes and variances of shading to give a darker or lighter ground shadow or wall shadow.

• NOTE: This is no longer a default texture pulled in the cloner, so if you need it you will need to untick the defaults only box when cloning. You can also save this image to reuse later, since it doesn't need to be included in your package you just need it to remap your shadow mesh to.

Floor Objects

Objects also have a LITE resource that cast indoor shadows. They are sized based on values in the LITE resource. The current version of s3pe does allow editing of these values but no specific tutorials exist as of yet to adjust this.

This particular issue was fixed by replacing the LITE resource in this package with the LITE resource from the Cheap Crib.

• NOTE: As values in the LITE resource are defined the 0x03B4C61D - LITE resource packed file type is updated.

Outdoor shadow is from another object

You didn't change the sunshadow mesh! An object has four meshes, one for high detail and one for low detail plus a sunshadow to match each respectively. When you edit the mesh you need to create a new low poly version to use as your sunshadow so that if used outdoors it will cast the proper shadow.

• MLOD 00000000 High detail mesh
• MLOD 10000001 High detail sunshadow
• MODL 00000001 Low detail mesh
• MLOD 10000001 Low detail sunshadow

If all else fails

But I know I did all of the above right!? If you really did fix any issues you may have had above and the same problem persists, did you remember to empty your caches?

• Game_Help:Sims_3_Crashing#Delete_Cache_Files

If that still doesn't fix then you can post a help question in Object Creation

Tutorials by Category
CAS | Patterns | Objects | Building | Worlds | Modding | Modding Reference